ADVANCED Motion Controls — 00:13:84 (MA-L)

ADVANCED Motion Controls holds a single MA-L block, 00:13:84, registered to "Advanced Motion Controls" at 3805 Calle Tecate, Camarillo, California, US 93012 — the company's operating headquarters, an 86,000-square-foot facility. This is not a bare shell registration: the registrant is an identifiable, privately held manufacturer founded in 1987 by Sandor Barta and Daniel Schoenewald, with a documented product line of industrial servo drives and motor controllers for brushed and brushless DC motors, linear motors, and voice coils. The networking relevance is direct: the drives ship with industrial-Ethernet and fieldbus interfaces — EtherCAT (including CANopen-over-EtherCAT and Ethernet-over-EtherCAT), Ethernet POWERLINK, CANopen, Modbus TCP, RS-232, and RS-485 — so hardware bearing this OUI is most plausibly a servo drive or motion controller on an industrial control network. The FlexPro and DigiFlex Performance (DP-Family) product lines are the EtherCAT-capable families. A common data-quality trap to avoid: third-party lookup tools such as maclookup.app display a "registered 06 February 2005, last updated 17 November 2015" date for 00:13:84 — this is a database artifact, not an IEEE fact. IEEE publishes no assignment/registration date for MA-L blocks, so no date should be attributed to IEEE or surfaced as a registration date. A second unrelated caveat: an "AMC Manager" product exists from Silex Technology (a different company); do not conflate its advisories with Advanced Motion Controls of Camarillo, for which no product-specific CVE was found.

IEEE assignment

00:13:84 → Advanced Motion Controls, Camarillo, CA, US [Confirmed] — IEEE MA-L (line 5105)

Registry / block size

MA-L (24-bit OUI; /24, 16,777,216 addresses); single block — no MA-M or MA-S registration found for this org [Confirmed] — IEEE the IEEE MA-L registry, the IEEE MA-M registry, the IEEE MA-S registry (cross-checked; not found in MA-M/MA-S)

HQ / country

3805 Calle Tecate, Camarillo, California, US 93012 (registry address matches the company's documented 86,000 sq ft HQ) [Confirmed] — IEEE MA-L / a-m-c.com/about

Company status

active, privately held, ~140 employees; founded 1987 by Sandor Barta and Daniel Schoenewald [Confirmed] — a-m-c.com/about

Device types

industrial servo drives / motor controllers for brushed and brushless DC motors, linear motors, and voice coils [Confirmed] — a-m-c.com/about, a-m-c.com EtherCAT product page

Notable products

FlexPro, DigiFlex Performance (DP-Family) — EtherCAT-capable servo drive families [Confirmed] — a-m-c.com EtherCAT technology page, automate.org

Network interfaces

EtherCAT, CANopen-over-EtherCAT, Ethernet-over-EtherCAT, Ethernet POWERLINK, CANopen, RS-232, RS-485, Ethernet UDP/IP, Modbus TCP [Confirmed] — a-m-c.com EtherCAT technology page

No IEEE date

IEEE public OUI data (the IEEE MA-L registry columns: Registry, Assignment, Organization Name, Organization Address) contains NO assignment/registration date. maclookup.app's "registered 06 February 2005 / updated 17 November 2015" for 00:13:84 is a third-party database artifact, not an IEEE fact, and must not be published as an IEEE registration date.

[Confirmed] — IEEE the IEEE MA-L registry; maclookup.app (artifact only)

Security/abuse context

Unknown — no CVE or security advisory found specific to Advanced Motion Controls (Camarillo) servo drives. An unrelated "AMC Manager" (Silex Technology) surfaced in search and must not be conflated. [Unknown]

Analyst note

A globally-administered 00:13:84 address identifies genuine Advanced Motion Controls hardware — most plausibly a servo drive / motion controller on an industrial (EtherCAT/CANopen/Modbus) network. Only one MA-L block is registered, so substance rests on company/product context, not multi-OUI volume.